Description

Quarzolite Tonachino plaster 1.5 mm 20kg

Uses

Acrylic resin based wall plaster with rustic effect for interior and exterior applications.

It can be used for decoration and can offer good protection to walls and smooth out surface imperfections.

It can be used to protect and decorate any type of building, even those that are already painted.

Some examples of applications

▪ Decoration and protection of all cement or lime based plasters.

▪ Decoration and protection of the Mapetherm system and all external wall insulation systems in general.

▪ Coating of well-bonded old coatings, old acrylic or mineral-based plasters.

Advantages

Quarzolite Tonachino is a flexible fibre-reinforced single coat plaster with a rustic finish, for interior and exterior applications, made from aqueous dispersion acrylic resin, quartz and light-resistant pigments.

Quarzolite Tonachino contains synthetic fibres for good crack resistance.

Quarzolite Tonachino is resistant to all types of climatic conditions, aggression from smog, seawater and solar radiation and forms a durable, protective layer that resists the ravages of time.

Quarzolite Tonachino adheres perfectly to all types of conventional plaster and to old paint or coatings.

Quarzolite Tonachino gives the substrate an attractive rustic finish and is available in a wide range of colours using the ColorMap automatic colouring system.

Quarzolite Tonachino complies with the requirements of EN 15824 ("Specifications for exterior plasters and interior plasters based on organic binders") for interior and exterior use.

Recommendations

▪ Do not apply Quarzolite Tonachino to wet substrates or substrates that have not cured thoroughly.

▪ Do not apply Quarzolite Tonachino at temperatures lower than +5°C and higher than +35°C.

▪ Do not apply Quarzolite Tonachino if the humidity level is higher than 85%.

▪ Do not apply Quarzolite Tonachino if it is going to rain, in windy weather conditions or if there is direct sunlight.

▪ Do not apply Quarzolite Tonachino to decorative drying plasters.

▪ In the case of surfaces that are particularly exposed to the decomposing action of algae, mould or fungi, choose Quarzolite Tonachino Plus, a mould-resistant acrylic plaster.

Technical characteristics

Quarzolite Tonachino is delivered ready for use.

CONSUMPTION DEPENDS ON THE GRAIN SIZE

▪ Quarzolite Tonachino 0,7 mm: 1,7-2,0 kg/m² for a full cycle,

▪ Quarzolite Tonachino 1,2 mm: 1,9-2,3 kg/m² for a full cycle,

▪ Quarzolite Tonachino 1,5 mm: 2,2-2,6 kg/m² for a full cycle,

▪ Quarzolite Tonachino 2,0 mm: 3,0-3,5 kg/m² for a full cycle.

For all versions, consumption is largely influenced by the roughness of the substrate.

PACKAGING

Quarzolite Tonachino is available in 25 kg plastic drums.

STORAGE

24 months if stored in a dry place away from heat sources and at a temperature between +5°C and +30°C.

Protect from frost.

PRODUCT IDENTITY

Consistency: paste

Colour: White and in various colours using the ColorMap automatic colouring system

Density (EN ISO 2811-1): 1,65-1,95 g/cm³ (depending on grain size).

Dry solids content by weight (EN ISO 3251): approximately 85 %.

Grain size: 0,7 mm - 1,2 mm - 1,5 mm - 2,0 mm

Consumption: 1,7-3,5 kg/m² (depending on grain size)

Recoating time:

12-24 hours depending on humidity and temperature and, in any case, only when the previous coat is completely dry

Application temperature range: from +5°C to +35°C

FINAL OUTPUT

VOC content of the finished product (white) (European Directive 2004/42/EC): ≤ 20 g/l

VOC content of the finished product (colour) (European Directive 2004/42/EC): ≤ 30 g/l

Data sheet

Max Grain Size
1.5 mm
Container
20 kg
Colour
White
Κατανάλωση Υλικού
2,6 kg/m²

You might also like

9 other products in the same category:

Product added to compare.