Thermoprotection screw anchor TermoZ CS II 8/155 mm

Reference: 0.38.895.030

MPN: 559108

Upon Order Up to 10 Working Days
€0.62
Tax included

The installation tool is used for milling the anchor

Quantity

Description

Thermoprotection screw anchor TermoZ CS II 8/155 mm

Advantages

  • The installation tool is used for milling the anchor, for an even layer of plaster without anchor marks.
  • Due to the special expansion zone of its plug, TermoZ CS II, is the first insulation anchor certified for installation in percussion drill holes in vertically drilled bricks. li>
  • With an ingenious tray design and special marking on the plug for correct and aesthetic installation.
  • The enclosed tray does not allow extraction of insulating material during screwing, thus ensuring a clean installation.
  • The special geometry of the bottom of the tray reduces the required screwing torque for easy and quick installation.
  • TermoZ CS II is a robust screw anchor for thermal insulation (ETICS) for secure fixings of any type of insulation board to all solid and perforated building materials.
  • It is easily and quickly installed.
  • It is certified for all building material classes A, B, C, D, E.
  • The optional CS installation tool guarantees a correct installation process without anchor marks.
  • The anchor is pushed through the insulation into the hole and screwed in.
  • For milled installation, the TermoZ CS mounting tool is required.
  • Optionally, the TermoZ CS mounting tool can also be used for tangential mounting by rotating the tool disc.
  • When the positioning tool is used, the installation is completed when the tool disc is touching the insulating material.
  • In milled installation, the anchor disc shall be covered with an insulation cap.
  • In flush mounting, no insulation cap is required.
  • Thanks to the special plastic-metal screw of TermoZ CS, all thermoprotection plates, including fire-resistant ones, can be securely fixed.

Applications

  • Fixing of thermal insulation panels to concrete and brick
  • Face fixing to all standard insulation materials
  • Face fixing to expanded polystyrene and dense rock wool insulation boards
  • Building materials
  • Building materials of classes A, B, C, D, E
  • Concrete
  • Concrete slab
  • Solid brick
  • Cement block
  • Perforated brick
  • Perforated calcium silicate brick
  • Lightweight concrete
  • Aerated concrete

Technical characteristics

Hole diameter (mm) 8 

Anchor length (mm) 155

Nominal anchor depth (mm) 25

Material Metal

Nose / Key TX30

Data sheet

Tool diameter
8 mm
Length
152 mm
Material
Μέταλλο
Βάθος Αγκύρωσης
25 mm

You might also like

Μηχάνημα Άντλησης Έτοιμου Σοβά MM 10
EKTOXEFTIS

Ready Mix Pumping Machine MM 10

Reference: 1.46.999.030

Price €9,300.00

The company "MAYROGIANNAKIS S.A.", expands the variety of plaster mixing pumps with another pump ideal for mixing ready-made dry plasters and other colloidal materials. This pump is suitable for construction sites supplied with single-phase electricity, 230 Volt only.

9 other products in the same category:

Product added to compare.