SurfaPore AG
Nanotechnology for the protection of marble, granite and masonry from graffiti paint stains
SurfaPore AG is easily applied to your existing, or new surfaces and creates a waterproof coating sealing the smallest pores of the surfaces making it easy to clean graffiti paint
GENERAL FEATURES
SurfaPore AG is an aqueous graffiti paint and permanent marker protection product applied to marble, tiles and vertical walls, bringing out the shine of the surface
SurfaPore AG particles cover the pores of vulnerable surfaces that can accumulate graffiti paint, polymerise and create a coating that prevents the paint from bonding to the substrate to be protected
To clean the surface of the graffiti paint, water and a plastic stiff brush or water pressure washer are recommended
APPLICATION SURFACES
Marble and unpainted masonry, porcelain tile, stone
INSTRUCTIONS FOR USE
The application surface must be clean and dry
No dilution required
SurfaPore AG is applied 2 times by brush, roller or spray on existing vertical surfaces
For non-absorbent surfaces (polished marble, polished granite surfaces), remove any excess material first with a slightly damp absorbent paper or towel and then with a dry cloth until there is no visible residue on the surface
Absorbent surfaces (plaster, stone) will absorb most of the SurfaPore AG applied
The material fully cures 3-4 days after application
For cleaning and graffiti removal use water and a stiff brush or pressurized water
You should re-apply SurfaPore AG after 5-7 graffiti cleanings in case of polished marbles and after 2-3 graffiti cleanings in other cases
Consumption: Estimated coverage is 24-30 m²/L for polished surfaces and 8-10 m²/L for other surfaces
Risk
H225 Liquid and vapours very flammable
H319 Causes severe eye irritation
H317 May cause an allergic skin reaction
H411 Toxic to aquatic organisms with long term effects
EUH208 Contains: Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one
May cause an allergic reaction
Precautions
P210 Keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition, do not smoke
P280 Wear protective gloves or protective clothing and personal protective equipment for eyes or face
P370+P378 In case of fire.
P273 Avoid release to the environment
P391 Collect the spillage
P103 Read the label before use
P261 Avoid breathing fumes, gases, concentrations of droplets or vapours and effluents
P271 Use only in an open or well-ventilated area
P101 If you seek medical advice, carry the product container or label with you.
P102 Keep out of the reach of children
Contains: - Silsesquioxanes, (3-(2-(2-aminoethyl)amino propyl)methyl, methoxy-terminated - N-(3-(trimethoxysilyl)propyl)ethylenediamine
Data sheet
- Container
- 4L
- Brand Name
- NANOPHOS