SurfaPore M 1 Lt
Reference: 0.38.731.003
For protection of marble, granite and natural stones from stains
Active nanotechnology to protect marble, granite and natural stones from stains
SurfaPore M waterproofs and protects marbles, absorbent granites and natural stones from oil
After application, the pores are covered, without altering the texture, colour and shine and the surface is protected from annoying stains
SurfaPore M is a liquid water-based product to waterproof and protect against oily stains
The product penetrates surfaces with very small pores without altering the original appearance of the surface and allows the surface to breathe but prevents water and oil from penetrating the application surface
Marble, absorbent granite, cement and natural stone
Surface application: It is recommended that the application surface is clean and dry
With a brush, or roller, or sprayer, cover with SurfaPore M, undiluted
For extra protection, apply a second "hand" within 3 hours of the first application
Full effectiveness occurs 24 hours after application
Coverage: Estimated consumption by application 8-10 m²/L per litre, depending on the absorbency of the surface
Attention
EUH208 Contains: Mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one
May cause an allergic reaction.
P103 Read the label before use
P102 Keep out of the reach of children
P261 Avoid breathing dust, fumes or gases, concentrations of droplets or vapours and ejections
P271 Use only in an open or well-ventilated area
P101 If you seek medical advice, carry the product container or label with you
Data sheet
Reference: 0.38.731.003
For protection of marble, granite and natural stones from stains
Reference: 0.38.731.024
Surface application fixative fluid for stabilizing loose building surfaces
Reference: 0.38.731.034
For protection of marble, granite and porcelain surfaces
Reference: 0.38.731.029
For protection of marble, granite and masonry from graffiti stains
Reference: 0.38.731.028
For protection of marble, granite and masonry from graffiti stains
Reference: 0.38.731.002
For protection of marble, granite and porcelain surfaces
Reference: 0.38.614.056
Siloxane coating, based on nanotechnology that repels water
Reference: 0.38.731.027
Surface application fixative fluid for stabilizing loose building surfaces