Spiked Roller Germany 240mm x 11mm
Reference: 0.63.454.007
For air evacuation for all self-leveling materials with the highest quality standards
There are 67 products.
Reference: 0.63.454.007
For air evacuation for all self-leveling materials with the highest quality standards
Reference: 0.19.830.050
For air evacuation during the application of epoxy coatings.
Reference: 0.64.520.000
Roller with spherical finish to avoid splashes. Ideal for high layer with thickness smaller than 4mm.
Reference: 0.64.520.005
Roller with very small footprint. Ideal for quick drying coatings with less than 1mm thikness.
Reference: 0.64.520.001
Roller with spherical finish to avoid splashes. Ideal for high layer with thickness smaller than 4mm.
Reference: 0.64.520.002
Roller with spherical finish to avoid splashes. Ideal for high layer with thickness smaller than 4mm.
Reference: 0.64.520.007
Roller with very small footprint. Ideal for quick drying coatings with less than 1mm thikness.
Reference: 0.64.520.004
Roller with spherical finish to avoid splashes. Ideal for high layer with thickness smaller than 4mm
Reference: 0.64.520.010
Roller for all floors over 4mm height. Doesn't create splashes.
Reference: 0.64.520.011
Roller for all floors over 4mm height. Doesn't create splashes.
Reference: 0.64.520.018
Roller for all floors over 4mm height. doesn't create splashes.
Reference: 0.64.520.019
Roller with stabillity and minimum amount of splashes.
Reference: 0.64.520.020
Roller with stabillity and minimum amount of splashes.
Reference: 0.64.520.021
Loose Spike Accessory for Roller
Reference: 0.64.203.001
Creates less surface disturbance so use it further into the curing cicle. Leaves a perfect finish.
Reference: 0.64.203.000
Creates less surface disturbance so use it further into the curing cicle. Leaves a perfect finish.
Reference: 0.64.999.079
With screw handle and splash guard. With German specifications.
Reference: 0.64.999.081
For air evacuation during the application of epoxy coatings.
Reference: 0.64.999.084
For air evacuation during the application of epoxy coatings.
Reference: 0.64.999.082
For air evacuation during the application of epoxy coatings.
Reference: 0.66.138.081
Suitable for removing air bubbles from fresh coatings.
Reference: 0.12.153.089
Handled Placer steel 80cm adj wood handle 130cm
Reference: 0.64.999.080
For air evacuation during the application of epoxy coatings.
Reference: 0.29.881.125
Ramp shaping tool with wooden handle
Reference: 0.64.203.008
Gutter chamfer tool with dimensions 150 x 210 mm and 15 degree angle
Reference: 0.29.881.124
Lightweight aluminium design for extra strength
Reference: 0.19.830.048
Use when placing epoxy-based coatings
Reference: 0.19.830.051
Gutter Shaping Tool for gutters by the company Scanmaskin
Reference: 0.64.999.086
Spiked shoes for safe access onto fresh coatings 50ΜΜ
Reference: 0.29.881.010
Chamfer shaping tool 152 x 76 mm Rim height 13 mm
Reference: 0.29.808.010
Chamfer shaping tool 152 x 76 mm Rim height 13 mm
Reference: 0.29.881.011
Chamfer shaping tool 152 x 102 mm Rim height 16 mm
Reference: 0.38.780.027
Provides a penetrating waterproofing coating on concrete mortar surfaces
Reference: 0.38.780.005
Coating powder - release powder for strip flooring from TEMNON
Reference: 0.38.780.003
Reference: 0.38.780.012
Realistically capture the texture of your desire with the "Rock" mould for strip flooring
Reference: 0.38.780.017
Durability, quality and impeccable aesthetics with the "Thessaloniki" mould for imprinting on stamped flooring
Reference: 0.38.780.016
Durability, quality and impeccable aesthetics with the "Thessaloniki" mould for imprinting
Reference: 0.38.780.015
Durability, quality and impeccable aesthetics with the "Thessaloniki" mould for imprinting
Reference: 0.38.780.008
Quality and time-resistant floor stamp for imprinting in "Giannadio" design
Reference: 0.29.808.066
These 25mm plated steel spikes are pre-installed and recessed into a flexible black plastic sole
Reference: 0.29.808.037
Quality sanding granite from Marshalltown, grain size 20
Reference: 0.29.808.036
Quality sanding granite from Marshalltown, grain size 20