Pressure rolls lino 50 kg
Reference: 0.64.999.071
Pressure rollers with special coating of the rollers against rust. Four sections, 50kg
There are 114 products.
Active filters
Reference: 0.64.999.071
Pressure rollers with special coating of the rollers against rust. Four sections, 50kg
Reference: 0.64.999.060
The Easy 5000 is a handy grooving machine for grooving the joint
Reference: 0.64.999.241
Triac ST Hot Air Tool Set from the Leister company.
Reference: 0.29.881.125
Ramp shaping tool with wooden handle
Reference: 0.64.203.017
Shark razor of durable construction with easy to handle wheel.
Reference: 0.64.203.015
Τool for trimming the welding wire. Replaces quarter moon knife and trim guide.
Reference: 0.64.203.009
Pin paving scraper ideal for thick layers of screed or fiber screed that have good flow.
Reference: 0.64.203.008
Gutter chamfer tool with dimensions 150 x 210 mm and 15 degree angle
Reference: 0.64.203.003
Floor Squeegee suitable for cleaning or transporting liquid / solid waste.
Reference: 0.29.881.112
Replacement Asphalt Squeegee Rubber 914.4 mm Straight
Reference: 0.29.881.113
Replacement Asphalt Squeegee Rubber 609.6 mm Straight
Reference: 0.29.881.115
Replacement Asphalt Squeegee 609.6 mm Straight
Reference: 0.29.881.114
Reference: 0.29.881.116
Used for applying sealants to existing asphalt surfaces.
Reference: 0.29.881.117
Black neoprene curved blade with durometer of 72 and temp. rating of 104° C with wooden pole 1.5m.
Reference: 0.29.881.110
Precise notches, V-shaped, with a tooth size of 3mm.
Reference: 0.29.881.111
Precise notches, V-shaped, with a tooth size of 4.5mm.
Reference: 0.29.881.124
Lightweight aluminium design for extra strength
Reference: 0.19.830.048
Use when placing epoxy-based coatings
Reference: 0.19.830.051
Gutter Shaping Tool for gutters by the company Scanmaskin
Reference: 0.64.999.086
Spiked shoes for safe access onto fresh coatings 50ΜΜ
Reference: 0.66.138.055
Blade made of stainless steel with a length of 60 cm.
Reference: 0.66.138.054
Doctor blade coating spatula from the Kaufmann company, with a length of 50 cm.
Reference: 0.29.881.010
Chamfer shaping tool 152 x 76 mm Rim height 13 mm
Reference: 0.29.808.010
Chamfer shaping tool 152 x 76 mm Rim height 13 mm
Reference: 0.29.881.011
Chamfer shaping tool 152 x 102 mm Rim height 16 mm
Reference: 0.29.137.002
Ideal for cement and lime plaster.
Reference: 0.29.137.003
Ideal for cement and lime plaster.
Reference: 0.29.137.004
Ideal for cement and lime plaster.
Reference: 0.29.137.008
Ideal for smoothing spray plaster, thin coats of plaster and synthetic plaster
Reference: 0.29.137.006
Ideal for finishing plaster and fibrous plaster, as well as lattice and filling plaster joints.
Reference: 0.29.137.005
Ideal for finishing plaster and fibrous plaster, as well as lattice and filling plaster joints.
Reference: 0.64.999.078
Ideal for cutting LVT parquet and cork up to 6mm thick.
Reference: 0.38.780.027
Provides a penetrating waterproofing coating on concrete mortar surfaces
Reference: 0.38.780.005
Coating powder - release powder for strip flooring from TEMNON
Reference: 0.38.780.003
Reference: 0.38.780.012
Realistically capture the texture of your desire with the "Rock" mould for strip flooring
Reference: 0.38.780.017
Durability, quality and impeccable aesthetics with the "Thessaloniki" mould for imprinting on stamped flooring
Reference: 0.38.780.016
Durability, quality and impeccable aesthetics with the "Thessaloniki" mould for imprinting
Reference: 0.38.780.015
Durability, quality and impeccable aesthetics with the "Thessaloniki" mould for imprinting
Reference: 0.38.780.008
Quality and time-resistant floor stamp for imprinting in "Giannadio" design
Reference: 0.29.808.066
These 25mm plated steel spikes are pre-installed and recessed into a flexible black plastic sole
Reference: 0.29.808.037
Quality sanding granite from Marshalltown, grain size 20