Πένσα για Μωσαϊκό
Reference: 0.66.138.040
With a length of 20 cm and ends of tungsten carbide.
Reference: 0.05.543.005
MPN: 68726
In stockElectronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component handle, cutting capacity diameter: soft 0.2 ... 2.0 mm; medium hard 1.2 mm; hard 0.5 mm
Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component handle, cutting capacity diameter: soft 0.2 ... 2.0 mm; medium hard 1.2 mm; hard 0.5 mm
Data sheet
Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component handle, cutting capacity diameter: soft 0.2 ... 2.0 mm; medium hard 1.2 mm; hard 0.5 mm
Reference: 0.66.138.040
With a length of 20 cm and ends of tungsten carbide.
Reference: 0.32.241.018
With wheels and hand handle for easy movement of your equipment.
Reference: 0.05.543.004
Needle-nose pliers with cutter, notched gripping surface, VDE 1000 V AC/1500 V DC
Reference: 0.19.830.047
Toothed blade 4 mm from the company Scanmaskin.
Reference: 0.29.881.123
They reduce your required fill by 85% compared to other systems.
Reference: 0.05.543.001
CUTFOX 18 DB Cable-cutting tool
Reference: 0.64.203.022
Paving rubber with a width of 360 mm and a soft plastic handle.
Reference: 0.05.543.019
Assortment box, supplied with ferrules according to DIN 46228-4: 1990-09, 50 pcs. of each. AI 0,5-8 WH, AI 2,5-8 BU, 100 pcs. AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK
Reference: 0.46.804.016
It is the ideal tool for cutting concrete for floors, bricks, porphyry and stones.
Reference: 0.32.241.012
Professional submersible pump for water recycling in stone - tile cutting machines.
Reference: 0.05.543.002
CUTFOX-S VDE_DB - Diagonal cutter
Reference: 0.05.543.018
Bit screwdriver set with quick-action chuck, 89 mm long slotted/crosshead (PZ and PH)/hex/Torx® bits, 17-part, in folding belt pouch, contents: PH 1,2,3 x 89; PZ 1,2,3 x 89; SL 1.5 x 5.5 x 89; TX 10-30 x 89; SW 3,4,5,6 x 89
Reference: 0.29.881.121
They reduce your required fill by 85% compared to other systems.
Reference: 0.64.203.020
It distributes the material evenly with a smooth squeeze of the trigger.
Reference: 0.05.543.003
Combination pliers, notched gripping surface, VDE 1000 V AC/ 1500 V DC
Reference: 0.05.543.008
Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm