Reference: 0.05.543.008
MPN: 56187
In stockStripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm
Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm
Data sheet
Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm
Reference: 0.05.543.005
Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component handle, cutting capacity diameter: soft 0.2 ... 2.0 mm; medium hard 1.2 mm; hard 0.5 mm
Reference: 0.46.804.016
It is the ideal tool for cutting concrete for floors, bricks, porphyry and stones.
Reference: 0.05.543.012
Crimping pliers set, consisting of CRIMPFOX-M (pliers) and dies for insulated cable lugs 0.5 ... 2.5 mm2 (1212074), non-insulated conduit lugs 0.5 ... 6 mm2 (1212079) and ferrules 0.25 ... 10 mm2 (1212080) and 16/25 mm2 (1212081).
Reference: 0.05.543.019
Assortment box, supplied with ferrules according to DIN 46228-4: 1990-09, 50 pcs. of each. AI 0,5-8 WH, AI 2,5-8 BU, 100 pcs. AI 0,75-8 GY, AI 1-8 RD, AI 1,5-8 BK
Reference: 0.05.543.015
Screwdriver, PH crosshead, VDE insulated, size: PH 1 x 80 mm, 2-component grip, with non-slip grip
Reference: 0.64.203.022
Paving rubber with a width of 360 mm and a soft plastic handle.
Reference: 0.05.543.009
Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts
Reference: 0.05.543.001
CUTFOX 18 DB Cable-cutting tool
Reference: 0.19.830.014
Helps you determine the hardness of concrete and makes it easier to choose your tools.
Reference: 0.05.543.000
CUTFOX 12 DB Cable-cutting tool
Reference: 0.05.543.002
CUTFOX-S VDE_DB - Diagonal cutter
Reference: 0.29.881.123
They reduce your required fill by 85% compared to other systems.
Reference: 0.05.543.016
Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
Reference: 0.05.543.018
Bit screwdriver set with quick-action chuck, 89 mm long slotted/crosshead (PZ and PH)/hex/Torx® bits, 17-part, in folding belt pouch, contents: PH 1,2,3 x 89; PZ 1,2,3 x 89; SL 1.5 x 5.5 x 89; TX 10-30 x 89; SW 3,4,5,6 x 89
Reference: 0.05.543.013
Screwdriver, slot-headed, VDE insulated, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Reference: 0.66.138.040
With a length of 20 cm and ends of tungsten carbide.
