Support System Chairs w/ Drive Tool (100 pcs) Universal Bypass
Reference: 0.29.881.123
They reduce your required fill by 85% compared to other systems.
Screwdriver, slot-headed, VDE insulated, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Data sheet
Screwdriver, slot-headed, VDE insulated, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
Reference: 0.29.881.123
They reduce your required fill by 85% compared to other systems.
Reference: 0.05.543.009
Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts
Reference: 0.05.543.012
Crimping pliers set, consisting of CRIMPFOX-M (pliers) and dies for insulated cable lugs 0.5 ... 2.5 mm2 (1212074), non-insulated conduit lugs 0.5 ... 6 mm2 (1212079) and ferrules 0.25 ... 10 mm2 (1212080) and 16/25 mm2 (1212081).
Reference: 0.46.804.016
It is the ideal tool for cutting concrete for floors, bricks, porphyry and stones.
Reference: 0.05.543.001
CUTFOX 18 DB Cable-cutting tool
Reference: 0.05.543.018
Bit screwdriver set with quick-action chuck, 89 mm long slotted/crosshead (PZ and PH)/hex/Torx® bits, 17-part, in folding belt pouch, contents: PH 1,2,3 x 89; PZ 1,2,3 x 89; SL 1.5 x 5.5 x 89; TX 10-30 x 89; SW 3,4,5,6 x 89
Reference: 0.64.203.069
Suitable for: Metabao. Milwaukee. Dewalt. Makita.
Reference: 0.05.543.004
Needle-nose pliers with cutter, notched gripping surface, VDE 1000 V AC/1500 V DC
Reference: 0.29.881.121
They reduce your required fill by 85% compared to other systems.
Reference: 0.64.203.022
Paving rubber with a width of 360 mm and a soft plastic handle.
Reference: 0.05.543.000
CUTFOX 12 DB Cable-cutting tool
Reference: 0.05.543.008
Stripping tool, for stripping multicore signal, control and fiberglass wires of Ø 2.5 - 11 mm. Insulation thickness up to 1 mm
Reference: 0.05.543.016
Screwdriver, PH crosshead, VDE insulated, size: PH 2 x 100 mm, 2-component grip, with non-slip grip
Reference: 0.05.543.006
Stripping tool, for cables and conductors from 0.02 - 10 mm2, self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm2 stranded/1.5 mm2 solid, replaceable stripping blade
Reference: 0.64.203.020
It distributes the material evenly with a smooth squeeze of the trigger.